Nodes Description

Processing Nodes

SRE Processing Nodes are categorized as follows. Click any link to jump to its content.

Manipulation
Extraction
List of records
JSON
Flow control
Database
Caching
External query
Date & time
URI
SIP
Stir/Shaken
Accounting
Call Admission Control
Misc

Placeholder mechanism

Some fields in some nodes admit placeholders instead of values.

The placeholder [calling] is replaced with the value of the variable calling in the Call Descriptor.

Placeholders are valid for fields in Table 1 below. In a Call Descriptor, there are predefined variables (see Table 2](#table-2)below) and variables dynamically created by nodes such as 'set variable' or 'create list of records'. Placeholders are applicable to all variables: predefined and created by previous nodes.

In the SLE, only a subset of predefined variables is available for Simulate Call.

Note

If a node sets a variable with the name of an existing variable, the existing variable is lost. For example, if a new variable is called 'destinationAddress', the previous content of this variable that comes from the SIP message is replaced.

Table 1

Nodes	Fields
Set variables	Value
HTTP JSON request	Body, URL
HTTP XML request	Body, URL
LDAP query	Filter
Nemo QoS	Nemo stats API URL endpoint
Send syslog message	Message
Send Email	Subject, Message
Append row to list of records	Value
Create list of records	row fields

Table 2

Predefined variables	SIP Call	Simulation SIP	Simulation Call
callId	X	X	X
called	X	X	X
calling	X	X	X
counter	X	X	X
destinationAddress	X	X
destinationPort	X	X
fromURI	X	X
fromUsername	X	X
lastCode	X
lastRequestURI	X
originalCalled	X	X	X
originalCalling	X	X	X
requestMethod	X	X
requestURI	X	X
requestUsername	X	X
sourceAddress	X	X
sourcePort	X	X
toURI	X	X
toUsername	X	X
ssCode ^[1]	X
ssAttestation ^[2]	X
ssOrigin ^[2:1]	X
ssDestination ^[2:2]	X

Manipulation

Digits manipulation

Description: Remove and/or add digits from/to the provided digit string

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Variable : name of the Call Descriptor variable of which the node will process the value. A click in the field displays the list of available variables. If no Store into field is available, the result is stored in the variable itself, not in another (output) variable.
Remove digits : removes n digits from the value, starting at defined position.
Insert digits : inserts n digits into the value, before the defined position (position 1 means « insert before pos. 1 ».

Regular expression substitution

Description: Find and replace a substring into the provided string using regular expressions and store the result in a variable

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Regular expressions substitutions: to substitute substrings in the selected value with the results of one or more regular expressions and to store the output in the value selected in the Store result into field. The regular expression defined in Reg Expression field is a search (finding substrings), not a match: abc([0-9]*)def will process 456 from input 123abc456def123 as well as from abc456def. Successive substitutions are allowed. The variable selected as output can be re-used as input for another substitution. Overwriting the input value with the output value in the same variable is also allowed. It is advisable to test the regular expression(s), using for example regexp101.com.

Set variables

Description: sets one or more variables

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Variables : to add one or more new variables to the Call Descriptor. Valuefield can be either an existing value (from the list) or a string. Placeholders ([variable_name]) are allowed: for a new variable named my_var, the input of Valuethis is the calling number: [calling] will store into my_varthe text « this is the calling number: » and the value of the calling variable. See Placeholder mechanism for more information.
If not set: if checked, will set the variable only if has not been set previously. If unchecked, will overwrite the current value of the variable if already set previously.
Indirect: if checked, the target variable name or placeholder expression is read from the variable value. Note that placeholder substitution can occur both in the indirect value expression and the final expression.

Unset variables

Description: unsets one or more variables

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Variables : to unset (or delete) one or more variables within the Call Descriptor.

Map Value

Description: Sets or changes the value of a variable depending on its current value. It allows for different possible mappings, in a sequential way.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Variable name: the name of the variable that one wants to replace
Mappings > Source value: the possible current value of the variable. Can be another referenced variable
Mappings > Mapped value: the new value that the variable will assume if at the moment of checking it has the value in "Source value"
Store into: the name of the target variable to be created/overwritten with the mapped data (leave empty to modify original variable)

Concatenate

Description: Concatenate several variables/strings into a single string and store the result in a variable

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Elements : one or more elements (string or existing variable name) to concatenate
Store into : the name of the target variable (existing or new) where the output of the operation will be stored.
Note
The same result for more than one variable can be achieved using the Set variables node.

Reverse

Description: Reverse the characters of the provided string and store the result in a variable

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Variable : name of the Call Descriptor variable of which the node will process the value. A click in the field displays the list of available variables. If no Store into field is available, the result is stored in the variable itself, not in another (output) variable.
Store into : the name of the target variable (existing or new) where the output of the operation will be stored.

Extraction

Digits extraction

Description: Extract some digits from the provided digit string and store them in a variable

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Extract digits : to set the variable(s) to extract digits from, to define the substring to extract (Start Index and Extraction length) and to set the target (existing or new) variable(s) (Store into)

Regular expression extraction

Description: Extract a substring from the provided string based on a regular expression with regex capturing groups and store the result in a variable

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Regular expressions extractions :
- Reg expression : the reg expression to use to extract a substring. Regex capturing group(s) are valid: example highlighted in blue in the screenshot below.
- Variable to match : the existing variable to extract the substring from.
- Group to extract : the sequence number of the capture group defined in Reg expression, NOT prefixed with a \ as this is not a substitution.
- Store result into: the target variable (new or existing) for this extraction.
Successive extractions are allowed. The variable selected as output can be re-used as input for another extraction. Overwriting the input value with the output value in the same variable is also allowed.
Note
The same result (extracting a substring using a regexp capture group and storing it into a new variable) can be achieved using the Regular expression substitution node.

List of records

Create list of records

Description: defines a static records list with multiple rows and columns

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Store into : the name of the target record list to be created with the initial data defined below
Initial data : to create the columns and rows of the record list to be created Columns are defined as the first row below Initial data and become headers. The next row(s) have the data.

Convert list of records to JSON object

Description: Converts internal data structures (a list of records) to a JSON object.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Read from: a list of records created beforehand by a Create LoR node (see above).
Store into: a name for the JSON object to create

Convert JSON object to list of records

Description: Converts a JSON object into an internal data structure (a list of records).

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Read from: a JSON object created beforehand, possibly by a Convert LoR to JSON node above.
Store into: a name for the list of records to create

Append row to list of records

Description: appends a row with values or a new column with a value to an existing records list

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Records list : the source list of records to be processed
Selective column append : adds a new column with new data to the records list (in green below) or a row with new data in existing columns (in blue below)

Append columns to list of records

Description: append one or more columns to an existing records list

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Records list : the source list of records to be processed
New columns: adds a new column with new initial value to the records list.
Remove all existing columns: if selected all existing columns will be removed from the records list.

Filter rows from list of records

Description: filters the rows from a list of records based on conditions

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Records list : the source list of records to be processed
Filter : to decide whether rows matching the conditions (defined below) are included (only matching rows are kept, non-matching rows are excluded) or excluded (only non-matching rows are kept).
True if : defines the combined logic applied to the conditions groups (OR / AND)
Condition groups : one or more groups of one or more conditions applied to the source record list The local True if allows defining a combined logic to apply to the conditions within the group.
Store manipulated records list into : the target list of records where to store the result of the applied filter. If left blank, the source list of records is overwritten with the result. In the screenshot below, the source (Records list)is rl and the target (Store manipulated... into)flr.
The screenshot below shows the Call Descriptor (in Simulate Call tab after a run) after filtering the source records list as shown above.
The Simulation line at the bottom of the grid is another way to view how the data have been processed during the execution of the whole service logic. For an example, see the Simulation Line screenshot in the section below.

Extract row from list of records

Description: picks one row from an existing records list and saves its values into variables

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Records list : the source list of records to be processed
Row selected : the row to pick: First, Last, Random or Index
Extract row index : the position of the row to pick from the list (the index start at zero [1 selects the second line]).
Remove row : removes the selected row from the source record list
Extract columns into respective variable names : adds each column as a new variable in the Call Descriptor (see first screenshot below)
Selective column extraction : stores the value of the selected row and column into the new variable defined.
Resulting simulation line:

Random pick a row

Description: randomly picks a row from a records list, optionally weight-based

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Records list : the source list of records to be processed
Column with weight : random picking probability can be affected by assigning a weight to entries in the record list. In the example below, a column weight has been defined for the list, with values 4, 4, 10.
If the column weight is selected in Column with weight as below, this has the effect that over 18 runs of the Randow pick node, values t1 and t2 will be picked 4 times each, while value t3 will be picked 10 times.
Remove row : removes the selected row from the source record list
Extract columns into respective variable names : adds each column as a new variable in the Call Descriptor (see above)
Selective column extraction : stores the value of the selected row and column into the new variable defined (see above) Resulting simulation line : the 3rd row with weight = 10 has been picked and each value of each column for this row has been extracted to a new variable named after the column header (green values in step 3).

Sort list of records

Description: sorts a record list based on the values in one or several columns

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Records list : the source list of records to be processed
Sort rows : to select column(s) to use as ascending or descending sorting key(s)
Store manipulated records list into : target record list to store the sorted list. Using the value given above as (source) Records List overwrites the source list.

Shuffle list of records

Description: using as seed a given Call Id from a SIP INVITE, shuffles the rows of source records list into a stable records list usable in crankback situations.

For example, a service logic will manage an error after sending a SIP message to a trunk by re-sending the same message (based on identical Call ID) to the second or third trunk of a shuffled records list of 3 trunks.

Note

Simulations of a service logic using this node MUST be launched from the Simulate SIP tab, as an INVITE having a Call ID is expected to process the source records list.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Records list : the source list of records to be processed
Store manipulated records list into: target record list to store the sorted list. Using the value given above as (source) Records List overwrites the source list.

Aggregate Column

Description: allows calculating the values of a specific column for entries in a record list

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Records list : the source list of records to be processed
Store results into: target variable to store the computed operation output. The output is a variable and not a record list.
Column: the column in the record list that is subject to the chosen calculation
Operation: available operations are:
- sum
- minimum
- maximum
- average
- count

Rotate list of records

Description: Rotate a list of records by swapping rows and columns. Data from the column selected in the source List of records become column headers in the resulting rotated list.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Records list : the source list of records to be processed
Store results into: name for the resulting list after execution
Column to use for new column headers: data in this column become the column headers of the resulting list.
The image below shows the Call Descriptor of the node after execution. Data in the source column1 become column headers in the resulting list.
Move current column headers to new column: name of an additional column storing the column headers of the source list (except the header of the selected «column to use») in the resulting list. If left empty, original headers are not kept (as in the image above).
The image below shows the resulting list with the original column headers preserved in newcol.

JSON

Create JSON object

Description: Create a JSON object with the help of the JINJA templating language

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
JSON data: Jinja template for the JSON content.
Store into: store into variable with this name.
Output
- If creation succeeds then jump to
- If creation fails then jump to

Validate JSON schema

Description: Validate a JSON object by providing a JSON schema

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
JSON object: json object to be validated.
JSON schema: json schema for validation.
Output
- If validation succeeds then jump to
- If validation fails then jump to

Extract JSON path

Description: Extract one or more elements from a JSON structure by specifying the JSON paths to access them

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Path: json object to be validated.
Mode: store mode, can be:
- First value, if available
- Array into JSON object, if not empty
Output
- If extraction succeeds then jump to
- If extraction fails then jump to

Flow control

Flow Control nodes allow managing conditions.

Conditions are defined through a variable, an operator and a value (var_a starts with 02). However, a variable is allowed as the value in some nodes, according to the table below. See Manipulation, Set variables for more details.

Flow Control nodes Variables allowed

Digits analysis - Combined conditions yes Combined condition groups yes Sequential conditions yes Days conditions - Load balance yes (weight) Regular expression match - Audio Codec decision -

Audio Codec decision

Description: Connect to different service logic branches based on the presence of a certain media codec in the SDP of the incoming SIP message. This message should be provided in the SIP Message field of the Simulate SIP tab.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Read From Record List: a record list with potential matching codecs.
Audio Codecs: one or more codecs to select the appropriate service branch. The list of available codecs can be found here: https://www.iana.org/assignments/rtp-parametersopen in new window.
- next node for codec 1, codec 2, etc.
- Fallback: if no matching codec is found in the list.

Digit analysis

Description: Create a digit map for a variable and a set of possible values (digits) and connect to different service logic branches depending on the most significant digits of the NA which is subjected to the analysis. If none of them is matched, a fallback output is provided.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Variable: the name of the variable to be tested
Selections: the set of values to be tested
- Digits: first, second, and third value for the variable
Output
- jump to: next nodes when variable = digit 1, digit 2, etc.
- fallback: next node if the variable does not match any of the digit values defined.

Combined conditions

Description: Create a simple condition or a logical combination of several conditions and connect to different service logic branches depending on whether or not the combined conditions are met.

The underlying syntax is: cond_1 op cond_2 op ... op cond_n with op = and/or

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
True if: logical test. True if any of the conditions is met (OR) or all conditions are met (AND)
Conditions : one or more conditions with variable, operator and value. Several conditions are logically combined along with the True if test (AND / OR).
Available operators :
- exists (no value required)
- does not exist (no value required)
- is
- is not
- contains
- does not contain
- starts with
- does not start with
- ends with
- does not end with
- is greater or equal to
- is greater than
- is less than or equal to
- is less than
- length is
- length is not
- length is greater or equal to
- length is greater than
- length is less than or equal to
- length is less than
- matches regular expression
- does not match regular expression
Output
- true: when all condition expression is true
- false: when all condition expression is false

Combined condition groups

Description: Create a logical combination (AND/OR) of several conditions between blocks of conditions and connect to different service logic branches depending on whether or not the combined conditions are met.

The underlying syntax is:

For the group of conditions: group_1 op1 group_2 op1 ... op1 group_n with op1 = and/or
For the conditions: within a group : cond_1 op2 ... op2 cond_m with op2 = and/or

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
True if: logical tests for the condition groups and for the conditions:
Condition groups: several groups of one or more conditions with variable, operator and value. Conditions within a group then condition groups are logically combined along with the True if tests (AND / OR).
Output
- true: when all condition expression is true
- false: when all condition expression is false

Sequential conditions

Description: Create a set of simple conditions that are tested sequentially until one condition is met.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Conditions : several conditions with variable, operator and value. The process exits when a condition is satisfied. If no condition is met, a fallback is provided.
Output :
- next nodes at exit of condition 1, 2, 3...
- Fallback: next node when no condition is met.

Alarm conditions

Description: Creates a condition based on an alarm type (see Settings/Alarms, col. Type) and connects to different service logic branches depending on whether or not the alarm is active.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Type prefix: the type of an alarm in the Alarm List
Caching: if the alarm is set and Caching is set to x secs, the SL will check every x secs internally (which means that an alarm just generated may not be picked up immediately).

Days conditions

Description: Create a weekly schedule with one-time frame per day, and connect a different service logic branch depending on whether or not the current time is inside or outside the provided time frame.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Hours Conditions: defines a schedule to test if the current time is/is not between time frame 1 (hh:mm) and time frame 2 (hh:mm).
Output :
- exit if match
- exit if not match

Load balance

Description: Distribute traffic over a set of service logic branches in line with the provided weights.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Weights: integers to determine how many times an exit node will be selected (pseudo-random).
Weights Selection rate Distribution
5 This weight/total of weights = 50% 5 times over 10
3 This weight/total of weights = 33% 3 times over 10
2 This weight/total of weights = 20% 2 times over 10
Output :
- next node for weight 1, weight 2, etc.
- Fallback: if the value of the selected weight is not an integer.

Weights	Selection rate	Distribution
5	This weight/total of weights = 50%	5 times over 10
3	This weight/total of weights = 33%	3 times over 10
2	This weight/total of weights = 20%	2 times over 10

Regular expression match

Description: Match one or more variables against a regular expression, combine them logically (AND or OR) and connect them to a different service logic branch depending on the outcome.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Conditions: one or more conditions testing if the value of the selected variable matches the regular expression
- Regular expression (can be a variable from the list or any «local» variable defined as explained in Set variables).
- Variable to test (can be a variable from the list or any «local» variable defined as explained in Set variables).
Conditions logic: if more than one condition is defined, selects the logical test OR (at least one condition matches) or AND (all conditions match).
Output :
- exit node if match
- exit node if no match

Phone number analysis

Description: Get region, network and timezone from a phone number

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Store type into: Store type into a variable. Type can be:
- fixed line
- mobile
- fixed line or mobile (for some countries it is not possible to determine between fix and mobile)
- toll free
- premium rate
- shared cost
- voip
- personal number
- pager
- universal access number
- voicemail
- unknown
Store network into: store network into a variable
Store time zone into: store time zone into a variable
Store country code into: store country code into a variable
Store country 2-letter code into: store 2-letter country code into a variable
Store country 3-letter code into: store 3-letter country code into a variable
Store country name into: store country name into a variable
Output :
- exit node if match: this is the case for valid phone numbers.
- exit node if no match: this exit is taken for invalid phone numbers.

SIP agent status

While not being an external query, this node has the same improved logging as described in Improved logging.

Description: Check the status of a remote SIP endpoint by specifying its URI and connect to different service logic branches depending whether the endpoint is up or down.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Get request URI:
Outputs:
- If the node is UP then jump to
- If the node is DOWN then jump to
- If the node is TRYING then jump to

Database

Check access token

Description: Check provided access token for a set of table access permission.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Access token variable: variable containing the access token.
Table access check: list of table access checks. For each table a read or read/write permission can be selected.
Outputs:
- If the token is valid and allows access to tables then jump to
- If the token is not valid or does not allow the required access to table then jump to

Create database record

Description: Contact the SRE REST API to add a new entry to one of the database tables

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Table: the name of the table where to create a new record
Fields update: a list of fields with the value each field will take for the new record. A unicity control prevents inserting values already existing for an indexed field, depending on the data model for the table.
Outputs
- record created: next node
- failure: next node if record creation fails (typically because of an invalid value)

Note

Creating a record does not affect any variable belonging to the service logic, only fields in the selected database table: no DB record field name or value is visible in the Call Descriptor or Simulation Timeline. The effect of the record creation is visible by refreshing the display of the Data Administration page of the table selected above.

Update database records

Description: Contact the SRE REST API to update one or more existing entries in one of the database tables

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Table: the name of the table containing the record(s) to update
Filters: field name/operator / value lines to filter the entire record list for selecting one or more records to update. Several filters can be used together and combined with the Conditions logic setting below.
Conditions logic: decides if the update will be executed if any of the conditions (filters) is met (OR) or all must be met (AND)
Fields update: a list of one or more field names, each with its new value.
Outputs
- records updated: next node
- no records updated: next node
- If the update fails then jump to
Note
Just as for creating a record, updating records does not affect any variable belonging to the service logic, only fields in the selected database table: no DB record field name or value are visible in the Call Descriptor or Simulation Timeline. The effect of the record update is visible by refreshing the display of the Data Administration page of the table selected above.

Delete database records

Description: Contact the SRE REST API to delete an existing entry in one of the database tables

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Table
Filters
Conditions logic
Outputs
- records deleted: next node
- no records deleted: next node

Database query

While not being an external query, this node has the same improved logging as described in Improved logging.

Description: Query one or more tables in the local database and store the retrieved fields in one or more variables

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Tables: one or more tables to query record(s) from
Extract fields: a list of one or more fields from the selected table(s), in the shape <table_name.field_name>, the value(s) of which is to be stored in the local variable given in Store into.
Note
If more than one table is selected, they MUST be joined using Tables join below. A query on more than one table with no join will abort and an error will be shown (red Call Descriptor).
Tables joins: mandatory if more than one table is selected. At least one field in the left table must match with a field in the right table: this is what creates the join. Except for the first join, the left table in a join must have been previously used as a left or right table in a previous join. Several joins with the same left and right tables can be configured sequentially to build multiple conditions for the same join.
Note
In instances where there is clear linkage between tables without ambiguity, typically due to the presence of only one foreign key from one table to another, this field is automatically filled in.
Conditions: one or more conditions to filter the list resulting from the query. Can be combined logically, see below.
Conditions logic: logical combination for the above conditions: all conditions met = AND or any condition met = OR.
Order by: sorting order for the result of the query
Offset: if non empty or > 0, excludes the n first lines from the result and shows the next lines.
Join type: can be "join" or "left join". With the option "join", results are found in table A only if table A record's referring field (foreign key to table B record) is populated, that is, not Null. With left join, results are found in table A also if table A record's referring field to table B is Null.
Fetch: shows and stores the first line of the result list or all the lines. Pay attention to the combination of Offset and Fetch: a result list of 3 records with Offset set to 2 and Fetch=all will show record #3 in a one-row array, the same with Fetch=first will not show an array but the values in the local variables set in Extract fields / Store into (see below).
Store records list into: name of the local variable / array where to store the result of the query after Conditions, Conditions logic, Offset and Fetch are applied. The variable or array is shown in the Call Descriptor, except if Fetch is set to 'First row'. In that case, the local variables set in Extract fields / Store into are used instead, no values are assigned to the Store records list into variable/array, and this is not showing in the Call Descriptor.
Caching: if a time slot duration is selected here (from 5 secs to 60 mins), the result of the query is cached with its set of parameters (Conditions, etc.) for that duration. If the same query is run again within the time slot, the query is not performed and the result previously cached is shown instead.
Outputs
- record(s) found: next node
- no record(s) found: next node

Caching #

These nodes allows to interact with an embedded in memory key-value cache to store and retrieve transient data quickly.

Get cached data

Description: Get cached data in memory

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid.
Description: any additional information, showing below the node name label in the service logic Build grid.
Key: key of the data to be retrieved
Store into: the SRE variable (existing or new) where to store the data.

Set cached data

Description: Set cached data in memory

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Key: Key used for identify the data (needed also for retrieval)
Value: Data to be stored
Time to live: for how many seconds this data must be kept in memory

These nodes allows to interact with an external mongo database to store and retrieve key-value data.

Get cached data (MongoDB)

Description: Get cached data from MongoDB

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid.
Description: any additional information, showing below the node name label in the service logic Build grid.
MongoDB connection string: MongoDB connection string in format mongodb://<user>:<password>@<host-1>,...,<host-n>/?replicaSet=<replica-set>&connectTimeoutMS=100&socketTimeoutMS=100&w=1&readPreference=nearest&serverSelectionTimeoutMS=100. Some options are optional. Use appropriate timeout settings as this node may introduce delay in processing if MongoDB is unreachable/unhealthy.
Cooldown duration: If the database cannot be reached, no additional attempts will be made during this time.
Errors to trigger cooldown: Number of consecutive errors before cooldown procedure is initiated.
Key: key of the data to be retrieved
Store into: the SRE variable (existing or new) where to store the data.

Set cached data (MongoDB)

Description: Set cached data in MongoDB

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
MongoDB connection string: MongoDB connection string in format mongodb://<user>:<password>@<host-1>,...,<host-n>/?replicaSet=<replica-set>&connectTimeoutMS=100&socketTimeoutMS=100&w=1&readPreference=nearest&serverSelectionTimeoutMS=100. Some options are optional. Use appropriate timeout settings as this node may introduce delay in processing if MongoDB is unreachable/unhealthy.
Cooldown duration: If the database cannot be reached, no additional attempts will be made during this time.
Errors to trigger cooldown: Number of consecutive errors before cooldown procedure is initiated.
Key: Key used for identify the data (needed also for retrieval)
Value: Data to be stored
Time to live: for how many seconds this data must be kept

External query

External query nodes allow querying data sources that are external to SRE. To query the SRE internal databases, use Database nodes instead.

Improved logging

The following nodes have improved logging showing the data sent in the request/query. After running a call simulation, mouse over or click the Call Descriptor of the node to view the logging.

HTTP JSON request
ENUM query
DNS query
LDAP query

Example for HTTP JSON request:

HTTP JSON request

Description: Retrieve data from an external web service by sending a HTTP request (get, put, post, deleted, patch) to a JSON API REST endpoint and save the result(s) in a variable(s) by providing the keypath of the data of interest

Note

A fair knowledge of JSON syntax is required to use such queries. Using postman tool (https://www.postman.com/downloads/open in new window)can help testing queries.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Method: an HTTP method, any of GET, PUT, POST, DELETE or PATCH
URL: the address (IP or URL), listening port (default: 5000) and path to data on the distant target of the request
Timeout (secs): if set, the request is cancelled if not completed before the time has elapsed. Highly recommended, as some queries can take much time to complete.
Authenticate: if formal authentication is required by the target, check the box to use the username/password set below to get access
Username: username to use for authentication on the distant webservice
Password: password to use for authentication on the distant webservice
Headers: to specify any of the standard HTTP headers and assign it a value, if so required by the target
Body: the body of the request in JSON syntax, if applicable (empty for GET)
Store Operations: the JSON path having the queried value and the SRE variable (existing or new) where to store it.
Skip extraction errors: allows to skip extraction errors and avoid an exception in such a case.
Status codes: to select HTTP error code(s) requiring a specific exit node (to create and connect in the Build tab)
Caching: if a time duration range (from 5 secs to 60 mins) is set here, and if the request (same URL and query) has been executed before within that time window, it is searched for in the cache, and data stored are returned as a result without re-executing the external request.
Do not wait for result: When enabled, all requests will be treated as successful until the number of pending requests reaches the configured threshold. Once this threshold is reached, the output will be considered a failure.
Maximum pending requests: To prevent an overwhelming number of pending requests it is essential to define this parameter considering the round trip time.
mTLS Configuration:
- Activate: if checked mTLS authentication is enabled.
- Client Certificate: client certificate to be used for authentication.
- Client Key: private key related to certificate.
- Client Key Password: passphrase for private key (optional).
- CA Certificate: CA certificate for validation.
Outputs:
- not ok
- timeout
- error response: HTTP error not otherwise specified, set specific error codes management with Status codes above.
- failure: error in the JSON path
- (if set with Status code: jump to an additional exit node)

HTTP XML request

Description: Retrieve data from an external web service by sending a HTTP request to an XML API endpoint and save the result(s) in a variable(s) by providing the XML path of the data of interest

This node uses the XPath syntax for the XML Path field in the Store Operations section.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Method: an HTTP method, any of GET, PUT, POST, DELETE or PATCH
URL: the address (IP or URL), optional listening port, and full path to the target XML file located on the external server. Example: https://www.w3schools.com/xml/simplexsl.xml.
Timeout (secs): if set, the request is cancelled if not completed before the time has elapsed. Highly recommended, as some queries can take much time to complete.
Authenticate: if formal authentication is required by the target, check the box to use the username/password set below to get access
Username: username to use for authentication on the distant server
Password: password to use for authentication on the distant server
Headers: to specify any of the standard HTTP headers and assign it a value, if so required by the target
XML Query: a PUT, POST, DELETE or PATCH request in XML format to modify data on the distant server. Depends highly on the distant server configuration, hence no examples can be provided here.
Store Operations (in XPath syntax):
- XML Path: the path to the data in XPath syntax. Example: /breakfeast_menu/food[1]/price
- Store into: the SRE variable (existing or new) where to store the data.
Status codes: to select HTTP error code(s) requiring a specific exit node (to create and connect in the Build tab)
Caching: if a time duration range (from 5 secs to 60 mins) is set here, and if the request (same URL and query) has been executed before within that time window, it is searched for in the cache, and data stored are returned as a result without re-executing the external request.
Outputs:
- success
- error response: HTTP error not otherwise specified, set specific error codes management with Status codes above.
- timeout
- failure: error in the XML Path
- (if set with Status code: jump to an additional exit node)

HTTP GET JSON Query (deprecated)

Use a better alternative node: HTTP JSON request

HTTP GET XML Query (deprecated)

Use a better alternative node: HTTP XML request

HTTP PUT XML Query (deprecated)

Use a better alternative node: HTTP XML request

LDAP query

Using this node requires a fair knowledge of LDAP protocol and its specifications.

Description: Retrieve data from an LDAP server. The data must be queried using a syntax compliant with RFC 4515.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Host: IP or hostname of the LDAP server to query
Port number (if required): default: 389. Can be different if the server administrator has changed the default port, especially if a specific security mode has been activated.
Security: select the running security mode
Username: user name with cn= and dc=
Password: password for that user
Query base DN: the level in the tree where to start the query, using LDAP syntax
Timeout (secs): limits the time allowed for query execution if the server is busy or overloaded
Depth: any of SUBTREE, ONELEVEL or BASE. SUBTREE: the base node plus all nodes below it ONELEVEL: the first level of nodes below the base node, itself and the lower levels excluded BASE: the base node only.
Filter: to filter entries with an LDAP syntax instruction compliant with RFC 4515
Search in members: to query also the members within a node
Attributes fetch: name(s) of the attribute to fetch. The values are stored in the record list (array) specified in the next field.
Store into records list: array to store the values of the fetched attribute(s)
Caching: if a time duration range (from 5 secs to 60 mins) is set here, and if the request (same URL and query) has been executed before within that time window, it is searched for in the cache, and data stored are returned as a result without re-executing the external request.
Outputs: Result of the query and next step:
- success
- not found
- timeout expired
- invalid credentials
- failure

DNS query

Description: Retrieve data from a DNS server. IP address(es) are returned when an FQDN (Fully Qualified Domain Name) is queried; FQDN is returned when an IP address is queried.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Query: the FQDN (www.example.com) to get the IP address(es) or the IP address to get the FQDN.
Query type: select the query type A or SRV. For A queries, the output records list is populated with the column "address" to display the corresponding addresses. On the other hand, for SRV queries, the output records list includes the following columns: "priority", "weight", "port" and "target". These columns provide information about the priority, weight, port number, and target address of the SRV records, respectively.
DNS servers: one or more DNS servers. They are queried in sequence; if not reachable, the process goes to the next server and the non-reachable server is put on a blacklist for one minute.
Timeout (secs): limits the time allowed for query execution if the server is busy or overloaded
Store into records list: array to store the values of the fetched attribute(s)
Caching: if a time duration range (from 5 secs to 60 mins) is set here, and if the request (same URL and query) has been executed before within that time window, it is searched for in the cache, and data stored are returned as a result without re-executing the external request.
Outputs: Result of the query and next step:
- success
- timeout expired
- failure

ENUM query

Description: Retrieve data from an ENUM server. Typically, returns a SIP address (sip:name@domain) corresponding to the phone number queried.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Phone Number: the phone number linked with the SIP address wanted.
DNS root: a string telling the server which tree to look for.
ENUM servers: one or more ENUM servers. They are queried in sequence; if not reachable, the process goes to the next server and the non-reachable server is put on a blacklist for one minute.
Timeout per server (secs): limits the time allowed for query execution if the server is busy or overloaded
Store into: array to store the values of the fetched attribute(s)
Caching: if a time duration range (from 5 secs to 60 mins) is set here, and if the request (same URL and query) has been executed before within that time window, it is searched for in the cache, and data stored are returned as a result without re-executing the external request.
Outputs: Result of the query and next step:
- success: a NAPTR response matching its regexp was received
- timeout expired: no answer from the ENUM server within the "Timeout per server" period
- failure
- no match: either a NXDOMAIN response or a NAPTR response not matching its regexp was received.

Nemo QoS

Description: Retrieve quality of service counters for several groups of choice from NEMO and store the results.

This node uses specific syntax and parameters depending on customer configuration, including a NEMO instance running in parallel with the SRE. Please contact Netaxis Support for more information.

Read configuration parameter

Description: Read a parameter from the configuration and store it in a variable

This node uses specific syntax and parameters depending on customer configuration. Please contact Netaxis Support for more information.

Date & time

Now

Description: Retrieve the current system time and date and store it in a variable. Mainly used for timestamp comparisons (for example to launch or stop a service having a set timestamp for activation/deactivation, like call forwarding).

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Store into : the name of the target variable (existing or new) where the output of the operation will be stored.

Add/subtract duration

Description: Add or subtract a number of weeks, days, months, seconds and/or milliseconds to/from a date and store the result in a variable

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Read from : the name of the source variable (can be the result of a db query)
Store into : the name of the target variable (existing or new) where the output of the operation will be stored.
Operation : to add or subtract the defined number of Weeks, Days, Hours, Minutes, Seconds, and Microseconds to or from the value of the Read from variable, and store the result in the Store into variable.

Extract Date/Time parts

Description: Extract date/time parts and store them into variables.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Variable: variable containing the date-time object. Leave empty to use current time.
Input timezone: input timezone
Convert to timezone: convert to selected timezone
Extract parts: select part to extract and store into a variable.

URI

The following nodes allow manipulations of a URI (Uniform Resource Identifier). In the SIP context, URIs are made of the following elements:

a scheme: sip/sips/tel
a user: <name>
a host
optionally, a port.

Example:

sip:001234567890@10.135.0.1:5060;user=phone

where sip is the scheme, 001234567890 is the user, 10.135.0.1 is the host and 5060 is the port (default SIP port). Additional parameters can be used, separated by ; (user=phone above).

Build SIP URI

Description: Construct a SIP URI with scheme, user part, host part and port and store the result in a variable

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Build SIP URI: selects a scheme from the drop-down list, sets user, host, and optionally port (default 5060) and sets a local variable to store the resulting URI string. Several URIs can be built in the same operation.
Note
If the string used in a field matches a variable present in the Call Descriptor, the value of the variable replaces the set string in the URI ('calling' becomes '3210245678').
Next: next node to jump to when done building the string.

Extract SIP URI (deprecated)

Kept for backward compatibility. Will be executed but cannot be used to create a new node. Instead, use Extract URI elements node below.

Extract URI elements

Description: Extract the part of choice of the provided SIP URI and store the result(s) in variable(s)

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Source URI: the URI string (or variable containing it) to extract elements from.
Extract scheme into: sets a local variable to store the extracted scheme string
Extract user into: sets a local variable to store the extracted user string
Extract host into: sets a local variable to store the extracted host string

To extract specific, additional parameters (;-separated then defined with = in a header field line):

Extract user parameters into respective variables: check to activate user parameters selection and storage into local variables
Selective user parameters extraction: selects user parameters to extract (string or variable holding the string value) and sets local variables to store them.
Extract URI parameters into respective variables: check to activate URI parameters selection and storage into local variables
Selective URI parameters extraction: selects URI parameters to extract (string or variable holding the string value) and sets local variables to store them.

Manipulate URI elements

Description: Update the part of choice of the provided SIP URI by another value and store the result in a variable

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Source URI: the URI string (or variable containing it) with elements to manipulate.
Store result into: the local variable storing the modified URI resulting from the manipulations below.
Replace scheme, user, host with: string or variable from the Call Descriptor to replace the element present in the Source URI above.

To set, replace or remove additional parameters (;-separated then defined with = in a header field line)

Set or replace user parameters: name of the user parameter and value to be used to set or replace
Remove user parameters: name of the user parameter to remove
Set or replace URI parameters: name of the URI parameter and value to be used to set or replace
Remove URI parameters: name of the URI parameter to remove

SIP

The following nodes can prepare manipulations of SIP INVITE messages (initial message in a SIP call). Such messages are made of two parts: header and body, as shown below. The header contains information about signalling, each line being a distinctive header (Via:, From:, To:, etc.); the body contains information about the media: IP addresses used and mainly the type of codec to use.

Changes to the SIP INVITE message are not visible in the Service Logic Editor (see Caution below), which only stores the requested processing actions that Kamailio will execute at the very end of the service logic.

[HEADER]

INVITE sip:001234567890@10.135.0.1:5060;user=phone SIP/2.0
Via: SIP/2.0/UDP 10.135.0.12:5060;branch=z9hG4bKhye0bem20x.nx8hnt
Max-Forwards: 70
From: "Calling User" <sip:151@10.135.0.1:5060>;tag=m3l2hbp
To: <sip:001234567890@10.135.0.1:5060;user=phone>
Call-ID: ud04chatv9q@10.135.0.1
CSeq: 10691 INVITE
Contact: <sip:151@10.135.0.12;line=12071>;+sip.instance="<urn:uuid:0d9a008d-0355-0024-0004-000276f3d664>"
Allow: INVITE, CANCEL, BYE, ACK, REGISTER, OPTIONS, REFER, SUBSCRIBE, NOTIFY, MESSAGE, INFO, PRACK, UPDATE
Content-Disposition: session
Supported: replaces,100rel
User-Agent: Wildix W-AIR 03.55.00.24 9c7514340722 02:76:f3:d6:64
Content-Type: application/sdp
Content-Length: 254

[BODY]

v=0
o=151 9655 9655 IN IP4 10.135.0.12
s=-
c=IN IP4 10.135.0.12
t=0 0
m=audio 50024 RTP/AVP 8 0 2 18
a=rtpmap:8 PCMA/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:2 G726-32/8000/1
a=rtpmap:18 G729/8000
a=ptime:20
a=maxptime:80
a=sendrecv
a=rtcp:50025

Note

Service Logic simulations are executed in the Simulate SIP tab, where a valid SIP INVITE message (like the one above) must be pasted in the Message field for the SIP nodes to have something to process.

Note

The nodes below (Extract SIP Header, Remove SIP Header, Add SIP Header, Replace SIP body, Invite Timer, Set From URI, Set to URI) have no immediately visible effect in the Call Descriptors. This is because they don't do more than store the requested actions to be processed by the Kamailio stack (not the SRE) at the very end of Service Logic execution. In other words, the SRE does not visibly modify the SIP INVITE messages: it rather instructs the SIP stack to do so.

If an Extract SIP Header node has succeeded in extracting the User Agent header value into a variable myvar_UA, then a Remove SIP Header node has removed the User-Agent header, and an Add SIP Header node has added a new User-Agent header, the removal and addition will not be visible in the Call Descriptors of the second and third operations, and the value set for myvar_UA by the first operation will remain visible in the Call Descriptor of the last node.

Extract SIP headers

Description: Extract SIP headers from the incoming SIP message and store them in a records list or plain variables.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Extract SIP Header Fields: Select one or more header fields from the drop-down list. Several fields can be selected for processing.
Store extracted headers into records list: sets or selects a records list or local variables to store the values of the header fields.
Next: next node if extraction was successful.
Extraction failure, next node if extraction fails.

Example:

Remove Audio Codec

Description: Remove audio codecs from SDP

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Read From Record List: record list containing the codecs to be removed.
Audio Codecs: add specific codecs to be removed

SIP regular expression extraction

Description: Extract a substring from a SIP message based on a regular expression with regexp capturing groups and store the result in a variable.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Extract from: drop-down list to select where to extract a substring from: SIP msg Headers, Body or both.
Regular expressions extractions: (must be filled in for the node to be created)
- Reg expression
- Group to extract
- Store result into
  Example:

After running a SIP simulation having a SIP message, the Simulation Timeline shows the extracted data:

Add SIP header

Description: Define a SIP header that needs to be added by the SRE before sending the SIP message to the next hop and this by sending the name of the header and its value.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Header name: selects one single header field from the drop-down list
Header value: sets the value for this header field (it can be a variable).
Note
The effect of this header addition operation will not be visible, as the current status of the SIP message after processing cannot be visualized in the Service Logic Editor (see Caution above).

Remove SIP header

Description: Remove a SIP header from the SIP message before sending it to the next hop.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Header name: selects one single header field from the drop-down list and removes it and its value from the SIP message.
Note
The effect of this header removal operation will not be visible, as the current status of the SIP message after processing cannot be visualized in the Service Logic Editor (see Caution above).

Replace SIP header

Description: Defines a SIP header that needs to be replaced/added by the SRE before sending the SIP message to the next hop and this by sending the name of the header and its value. There are two possibilities:

the requested header is not present in the original INVITE: the header is added
the requested header is already present in the original INVITE: the header value is replaced.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Header name: selects one single header field from the drop-down list
Header value: sets the value for this header field (it can be a variable).
Note
The effect of this header removal operation will not be visible, as the current status of the SIP message after processing cannot be visualized in the Service Logic Editor (see Caution above).

Replace SIP body

Description: Modify the body of the incoming SIP message before sending it to the next hop (e.g. SDP).

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Source regular expression: the string to be replaced in the body, using a regular expression as a search.
Replacement string: the string for replacing the string found in the body, taking groups into account
Ignore case: if checked, the search will return the matching string without taking into account the cases ('ip' would match as well as 'IP').
Multiple replacements: if checked, would replace every string found if more than one match is within the same line.

Remove SIP body

Description: Remove the body of the incoming SIP message or response before sending it to the next hop (e.g. SDP).

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.

Strip To Tag

Description: Remove the to-tag from the SIP response. This node can be used only in service logics for replies.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.

Invite Timer

Description: Set a timer which hits if no final reply for an INVITE arrives after a provisional message was received (e.g. think at scenario's like call forwarding on no reply).

When the SRE relays a SIP INVITE to a destination, using this node sends a command to the Kamailio SIP stack to define a timeout specifying how long the reply can be awaited for. When the timer duration is over, the process considers that this INVITE will never get a reply: the call is terminated and a CDR is generated.

This could be used, for example, with international calls where the connection takes longer to be established.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Timer (ms): the duration of the timer in milliseconds
Next: next node to jump to when the timer has expired.

Note

Similarly, SIP simulation is not available for this node, see Caution above.

Set From URI

Description: Update the URI part in the From: of the incoming SIP message to the provided string before sending it to the next hop

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
From URI: the new value for the URI in the From: header field, or the name of a variable that contains it (for example built by a Build SIP URI node above).
Note
The effect of this Set From URI operation will not be visible, as the current status of the SIP message after processing cannot be visualized in the Service Logic Editor (see Caution above).

Set To URI

Description: Update the URI part in the To: of the incoming SIP message to the provided string before sending it to the next hop

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
To URI: the new value for the URI in the To: header field, or the name of a variable that contains it (for example built by a Build SIP URI node above).
Note
The effect of this Set To URI operation will not be visible, as the current status of the SIP message after processing cannot be visualized in the Service Logic Editor (see Caution above).

Stir/Shaken

Encode JWT

Description: Create a new Json web token

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Payload to encrypt: data to be encrypted, can be a json object or plain variable
Private key variable: variable containing the private key used for encryption
Certificate URL: URL of the certificate to be included in the JWT header
Expiration Time: set an expiration time (in seconds) in the JWT header
Store into variable: name of variable to use for storing the token

Decode JWT

Description: Decode an existing Json web token

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Payload: variable holding the data to be decrypted
Certificate variable: variable holding the certificate for token verification
Root certificate variable: optional variable holding the root certificate for certificate validation
Enable certificate validation: if enabled certificate will be check for validity (recommended)
Store into variable: name of a variable to use for storing the decoded token, data will be stored as a json object.

Validate JWT

Description: Extract information from a decoded JWT

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Read token from variable: variable holding the decoded token
Store attestation level into variable: create (or update) a variable with the STIR/SHAKEN attestation level (A, B, C)
Store orig/tn into variable: create (or update) a variable with the calling number stored in the token
Store dest/tn into variable:: create (or update) a record-list variable with the called numbers stored in the token

Generate Identity

Description: Generate an identity header value.

Note

this node generates the content of the identity header but does not add it to the SIP message. You need to add it explicitly wit the Add Sip Header node.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
JWT token: variable holding the encrypted token
Certificate URL: URL of the certificate to be included in the identity header
Store into variable: name of a variable to use for storing the data of the new identity header

Extract Identity

Description: Extract token and certificate URL from identity header payload. Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Read from variable: variable holding the identity header value (typically this is extracted with Extract SIP headers node)
Store token into variable: create (or update) a variable with the encrypted JWT token
Store certificate URL into variable: create (or update) a variable with the URL of the certificate

Add identity header (Kamailio-managed)

Description: add identity header with Kamailio Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Attestation level: variable holding the desired attestation level (A, B, C)
Certificate URL: variable containing the certificate URL. This URL must be reachable from call processor nodes.
Private key: variable containing the private key used for encryption

Accounting

When the SRE is operating in proxy mode (managing SIP calls from INVITE to BYE or error), CDRs are generated based on a CDR standard format with default fields. 50 fields are reserved for the system, not all of them being currently used.

For more details about the CDR Standard format, please refer to the Accounting Specs document available from Netaxis Solutions Support team.

More fields can be added to the standard CDR format, to customize the output. These fields can only take the name and value of variables present in the Call Descriptor.

Note

Simulation of a complete SIP call is not possible in the SLE, which manages only the INVITE part of the call. To test the following nodes, one has to use a SIP call simulator or place a call from a phone.

Append CDR fields

Description: Append an additional field of choice (and its value) to the CDR output stream

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Elements: one or more instances specified by the names of variables present in the Call Descriptor. Example If a variable «enterprise» and a variable «site» are present in the Call Descriptor (extracted from a SIP INVITE, or set in any manner by a service logic), specifying one element with «enterprise» and a second element with «site» will append a field enterprise and a field site (and their value) after the 50 first reserved fields in the CDR, in the first available positions, i.e. 51 and 52 if no other Append CDR field node has been used before. Using another Append CDR fields node after the first one would append its elements in the next available positions, starting from 53 in our example.

Set CDR fields

Description: Change/update the position of a field in the output CDR

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Elements: one or more instances specified by the names of variables present in the Call Descriptor. The field Position defines the new position of the element in the CDR output stream, starting at position 51 (with an offset of 50, i.e. after the 50 positions reserved for the system). For example, a value of 5 in the field will set the element position at 55 in the CDR output stream.

Set CDR filename

Description: Set CDR filename prefix for this call

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Prefix: The prefix value will be utilized to name the output CDR file following the format: cdr-[prefix]-[timestamp].

Call Admission Control

Call Admission Control allows limiting the number of calls that one or more users can place (outgoing calls) or receive (incoming calls). A record is created in a side Mongo database for every active call matching the parameters defined with the Register Call for CAC node. The Check CAC node is used to verify the number of calls currently recorded as active in the database for a user or group identified by the Aggregation ID.

Note that the Mongo database is only used to manage the CAC counting and is completely independent of the Postgres database used for data administration.

Note

Register call for CAC

Description: Define based on which parameters the call admission control is administered. When the node is executed, each call matching the parameters is counted and recorded in the database when starting (INVITE), and the record is freed (the number of active calls decreases) when ending (BYE or error code). An automatic cleanup mechanism takes care of calls which would not end (no BYE or no error code received).

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Aggregation id: an existing variable identifying the user or group of users to consider for CAC. Example: calling. If simultaneous calls are placed from the same calling number, each call will have a distinct record in the database.
Direction: the direction of the call to consider for CAC. Example: outgoing.

Check CAC

Description: Check the number of calls currently recorded as active by the system. This node usually takes place in the service logic before the Register Call for CAC node, to check if a user or group is still within the limits defined with Max calls or Max outgoing calls and Max incoming calls. If yes, the call is admitted and a Register Call for CAC node can be used to record the call.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Aggregation id: same as above
Max calls: the maximum number of calls allowed for a user or group, whatever the direction. An existing database field like max_calls_user can be used instead of a mere integer.
Max outgoing calls: the maximum number of outgoing calls allowed for a user or group. An existing database field like max_calls_user_out can be used instead of a mere integer.
Max incoming calls: the maximum number of incoming calls allowed for a user or group. An existing database field like max_calls_user_in can be used instead of a mere integer.
Note
The Max conditions are evaluated in sequence, by reading the number of active calls recorded in DB for the Aggregation ID and Direction considered. Empty conditions are ignored. New calls will be admitted as long as the number of recorded calls is below the limits, otherwise, they will be rejected until active calls end and are removed from the DB counting.
Store total calls count into: the number of calls registered for the specific Aggregation id is returned by this counter and stored in the provided variable.
Store total calls percentage into: the percentage of resource consumption (with reference to the provided max calls) registered for the specific Aggregation id is returned by this counter and stored in the provided variable.
Direction: deprecated, not used anymore.
If call is admitted, jump to: usually, a Register Call for CAC node
If call is rejected, jump to: usually, a SIP output node like SIP 403 Forbidden

Additional information

The Call Admission Control can be used at different aggregation levels. A user having «1234» as calling number may have consumed the number of active calls authorized, but the amount authorized for the enterprise the user belongs to may not have been consumed yet. This would allow a different user with calling number «5678» to place or receive calls.

This is achieved by using several Check CAC nodes in sequence, then several Register CALL for CAC nodes so the counting of active calls is done at different levels, for example user, then site, then enterprise.

Misc

Add tag

Description: add one or more tag for statistics selection and aggregation. Tags filtering or grouping can be added to custom dashboards, for reference see Admin Guide.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Name: name of tag
Value: value of tag

Evaluate expression

Description: Evaluate a Python expression on the local system before continuing to the next node. Only constants are admitted, variables or placeholders are not.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Expression: a simple Python expression with constants and operators (variables not admitted).
Store into: name of a variable to use for storing the result of the expression. Note that the content of the variable can be seen in the Simulate Call tab when mousing over the 'evaluate expression' node step number (or subsequent nodes) after Run.

Render template

This node is used to build a string from a JINJA (python templating language) rendering template (see https://jinja.palletsprojects.com/en/2.11.x/open in new window). From the template designed, local variables can be accessed like this: {{called}} ; one can also use conditions etc. from within the templating language.

Description: Define a JINJA template and replace its parameters by variables of choice and store the result in a variable

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Template: the text of the template according to the JINJA syntax.
Store into: name of a variable of choice to store the string resulting from the designed rendering template.

Shell command

Description: Execute a shell command on the local system.

Note

There is no validation or rollback for the execution of the command. To be used with extreme care.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Shell command: one or more (separated by ; ) shell commands to execute
Strip \r or \n characters at end of command output
Store into: name of a variable to use for storing the output of the executed command(s). Note that the content of the variable can be seen in the Simulate Call tab when mousing over the 'shell command' node step number (or subsequent nodes) after Run:
Outputs:
- next node if execution succeeds
- next node if execution fails

Generate alarm

Description: Generates an alarm, which will show both in the Alarms screen and via SNMP traps.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Type:it's the type shown in the Alarms tab, allowing for search based on type.
Severity: Info, Warning, Minor, Major, Critical

The alarms generated by this node are never cleared: this is left as a manual action or by the Clear Alarm node. If several alarms are generated using this node and have the same Type and Description, they will be grouped within the Alarms list.

Increment custom counters

Description: Allows incrementing a counter with a given name by a given value. The counter is expressed in terms of hits/sec., in the same way, all the metrics in the Dashboard tab Stats:Counters are shown. This is useful for example to have the dashboard display the number of calls/sec. tagged in a certain way. Once created with the Service Logic node, the custom counter is shown in the Dashboard tabs Stats:Counters and Stats:Performance.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Name : the counter's name
Value : the counter's increment value

Send syslog message

Description: Send a message to a remote syslog server. The message will be appended to an existing syslog text file.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Address: IP Address of the remote syslog server
Port: 514 --- default port on the syslog server for listening the syslog messages
Facility: information about the origin of the message. How the message will be handled is determined by a configuration file designed by the server administrator: send a mail, write to log file <filename>, etc.
Log level: criticality level (any of: debug, info, warning, error, critical)
Message: text of the message. Optionally, values stored in variables from the Call Descriptor can be added to the text using a placeholder [variable_name]. See Placeholder mechanism for more information.

Send Email

Description: Send an email with a configurable destination, subject and message via an SNMP server of choice.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
SMTP Configuration: information provided by the mail service provider
Recipients: e-mail addresses of the message recipients
Subject, Message: the title and text of the message. Placeholders are admitted in both fields.

Clear Alarm

Description: Clear an alarm, if the type prefix matches an existing custom alarm, previously triggered by a Service Logic and still active in the system.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Type prefix : the prefix part of a custom alarm that matches an active alarm. For example, if an active alarm has the type = "service1.status.status1", the clear alarm with a type prefix = "service1.status" would clear this alarm.

Output Nodes

SIP

SIP Relay

As output at the end of a service logic providing a destination for a SIP INVITE, this node sets the SIP URI to use and specifies optional processing (alternative destination, recursion) when a SIP error occurs.

Description: Provide a new request URI and proxy the INVITE to the next hop

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
New SIP R-URI: name of the variable storing the new URI at the end of the service logic process, usually in the format sip:username@domain (domain being an IP address or domain name)
Note
In order to force use of tcp for outgoing SIP messages you need to append ;transport=tcp to the request URI.
Destination host: fixed IP address (and optionally port, for example, non-standard port 5061) to be used alternatively if the destination IP address stored in the variable is not to be used. If empty, the SIP URI from the above variable is used.
Note
In order to force use of tcp for outgoing SIP messages you need to append ;transport=tcp to the destination host address and port.
Recurse call on SIP error: when checked, if a SIP error is returned (for example 503 Service Unavailable), a new iteration of the service logic is executed with the execution counter variable incremented by 1.
Reply status codes to intercept (regex): when not empty all SIP responses with code matching the regular expression will be intercepted and the service logic for SIP reply will be executed for each response.
Persist call descriptor on recursion or reply handling: when checked, the values of the variables stored in the Call Descriptor at the end of the previous iterations are kept at the start of the next one. This prevents the service logic from re-executing DB queries already done: the results of the queries (for example, multiple destinations stored in a record list) remain available for the next execution of the service logic. The counter is incremented (Recurse call option above), the next record in the record list will be used without having to re-query the DB(s). See also the explanation of Persist Call Descriptor option in SRE Service Logic Editor Manual / Simulate SIP tab section (cross-references to other documents are currently not implemented).

SIP Relay with forking

Description: Provide a list of new request URIs and proxy the INVITE to all R-URIs in parallel.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid. sip:username@domain (domain being an IP address or domain name)
Destination host: fixed IP address (and optionally port, for example, non-standard port 5061) to be used alternatively if the destination IP address stored in the variable is not to be used. If empty, the SIP URI from the above variable is used.
Records list: new R-URIs will be read from this records list
R-URI column name:name of the column of the record list that contains new R-URIs.
Recurse call on SIP error: when checked, if a SIP error is returned (for example 503 Service Unavailable), a new iteration of the service logic is executed with the execution counter variable incremented by 1.
Reply status codes to intercept (regex): when not empty all SIP responses with code matching the regular expression will be intercepted and the service logic for SIP reply will be executed for each response.
Persist call descriptor on recursion: when checked, the values of the variables stored in the Call Descriptor at the end of the previous iterations are kept at the start of the next one. This prevents the service logic from re-executing DB queries already done: the results of the queries (for example, multiple destinations stored in a record list) remain available for the next execution of the service logic. The counter is incremented (Recurse call option above), the next record in the record list will be used without having to re-query the DB(s). See also the explanation of Persist Call Descriptor option in SRE Service Logic Editor Manual / Simulate SIP tab section (cross-references to other documents are currently not implemented).

SIP SIP Reply Relay

Description: At the conclusion of a service logic for sip replies, this node allows the forwarding of the message.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.

Proxy SIP Error

This node has no parameters: it simply sends back to the call originator the last SIP error sent to SRE by the network instead of an SRE specific output like a SIP error node (see below SIP 301 to 607).

Description: Proxy the last SIP error received from the network to the call originator.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.

Example:

A service logic has been iterated 3 times (counter = 2) and no destination has been found reachable after the 3 iterations. Instead of using specific SIP error nodes as ultimate outputs for this logic, this node simply returns to the call originator the last SIP error sent to SRE by the network, whatever the particular reason for which no destination is reachable.

Recurse

Description: Recurse, i.e. execute the next iteration of the service logic, triggered at the reception of an error message from the network, or based on the results of conditions in the course of the current iteration (see example below).

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Request URI: name of the variable storing the destination URI to be used by the service logic on recursion, usually in the format sip:username@domain (domain being an IP address or domain name)

Example:

At some step in its course, the service logic checks the status of the SIP Agents under monitoring (see SRE Admin Guide for details). If a SIP Agent is UP, the set destination is reachable and a SIP Relay output node is specified as the next hop. If no SIP Agent is UP (all DOWN or TRYING), the set destination is not reachable: to avoid sending a useless INVITE to the network, this Recurse output node is used as the next hop, with an alternative destination specified in Request URI. This causes the service logic to recurse, i.e. to execute a new iteration with the counter incremented by 1 to try and find an available SIP Agent with a reachable destination.

Add registrations

Description: This node add registration info. Typically this node can be used in scheduled service logics to request SRE to act as a registration client towards external proxies.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid.
Description: any additional information, showing below the node name label in the service logic Build grid.
Records list: name of the record list containing the registration info.
UUID column: name of the column containing the UUID. This will be used in the REGISTER Contact header.
Username column:name of the column containing the username.
Domain column: name of the column containing the domain.
Realm column: name of the column containing the realm. Leave empty to disable realm matching.
Authentication username column: name of the column containing the username to be used for authorization.
Authentication password column: name of the column containing the password to be used for authorization.
Authentication proxy column: name of the column containing the proxy address to be used for authorization. The format of the proxy address can be sip:host[:port] or sips:host[:port].
Expires column: name of the column containing the expire time in seconds.

Custom SIP Response

This node allows defining a customized SIP response by specifying both the response code and the reason header.

SIP 301 to 607

All these nodes correspond with standard SIP messages and codes, described in the RFC3262 document and therefore not further described here.

They are sent back to the call originator based on the results of the service logic processing.

An alternative output is the Proxy SIP error node above, which sends back the last error received from the network instead of returning a more specific error determined by the service logic results.

SIP Registrar

The SIP Registrar nodes are used to authenticate REGISTER or INVITE SIP messages.

Please refer to the Training document Registrar for SRE for detailed explanations. This document can be requested from Support Team.

Authenticate

Description: after an initial REGISTER without an authentication header (and authStatus = 0), this node challenges the SIP client to provide a password authenticating it for further processing.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Realm: name of the realm. By default, if not explicitly specified, the realm extracted from the "From" header of the SIP message will be used for the authentication challenge.
Password: the value of a variable retrieved through a DB request «fromUser» providing the SIP client identity and credentials stored in DB. This is the value the SIP Client has to provide on REGISTER. Can be in plain text; if the Password in HA1 format control is checked, the password is using HA1 format, i.e. HA1 = MD5(username:realm:password). This allows storing the password in DB in a secure way (the original readable password being unknown and not stored).

Save in Location Service

Description: When the authentication is successful, this node sets the authStatus variable to 1 and stores the SIP client location information in DB.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.

Lookup in Location Service and Relay

Description: this node is used to relay an INVITE to an endpoint that has been registered (and saved in Location Service). Based on the R-URI provided, it looks for the location information in DB and if found, relays the INVITE to the location of the registered endpoint.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
New SIP R-URI: the URI of the INVITE destination.
Recurse on SIP error: when checked, if a SIP error is returned, a new iteration of the lookup is executed with the execution counter variable incremented by 1 to select, for example, an alternative destination (Voice Mail, Send e-mail...).

ENUM

The E.164 Number to URI Mapping (ENUM) standard uses special DNS record types to translate a telephone number into a Uniform Resource Identifier (URI) or IP address.

This particular process must be part of a service logic using the ENUM interface, where the SRE acts as an ENUM server.

An external equipment from the VoIP network launches, as a client, an ENUM query towards the sre-enum-process. The query has an enumNumber value (phone number value) and an enumQuery value (the phone number reversed and the DNS root, i.e. the NAPTR format).

The sre-enum-process (ENUM server) answers the query with one or more URIs or IP addresses matching the original phone number value. The answers can be formatted and edited as described below, and are returned to the external client origin of the query.

ENUM answer

Description: Formats and provides one or more URIs or IP addresses matching an ENUM query based on a phone number.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Answers: one or more set of parameters formatting the URIs or IP addresses from the query. Parameters are:
- Order: a primary order criterion for using the answers
- Preference: a second preference criterion for answers having the same order criterion. Allows load balancing between answers.
- Flags: sets the type of answer (depends on the DNS protocol).
- Source regex: manipulation of the string returned by the ENUM server, for example, to capture a part of the string using ().
- Destination regex: manipulation of the destination string, for example to transform it into \1@domain where @domain is the result of a DB query.

Note

In the Service Logic Editor, the Simulate ENUM tab is masked to avoid too many tabs in the interface. It can be restored through an easy operation to be performed by Netaxis Support team.

ENUM multi-record answer

Description: this output node allows storing all ENUM answer records into a record list, and indicates the relevant columns in the node.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Record list : the name of the record list containing the ENUM answers parameters.
TTL column name : the name of the column in the record list containing the ENUM Answer TTL.
Order column name : the name of the column in the record list containing the ENUM Answer Order.
Preference column name : the name of the column in the record list containing the ENUM Answer Preference.
Flags column name : the name of the column in the record list containing the ENUM Answer Flags.
Service column name : the name of the column in the record list containing the ENUM Answer Service.
srcRegEx column name : the name of the column in the record list containing the ENUM source (matching) Regular Expression.
dstRegEx column name : the name of the column in the record list containing the ENUM Answer destination (translation) Regular Expression.

ENUM response NXDOMAIN

This output node is used to provide an NXDOMAIN (No Matching found) response to the ENUM client.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.

HTTP

HTTP response

This node allows specifying the content-type and body of the response of type 200 OK which will be returned in case of execution of a service logic for the HTTP interface.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.
Content-type: the MIME type (two-part identifier for file formats and format contents) of the Body.
Body: the content of the response

Examples

content-type	body
text/plain	toto
text/html	<html><body></body></html>
application/json

Probing

These nodes are solely employed for advanced probing, allowing the choice of a custom probing service logic.

Agents List

This node takes as input a record list of peers to send customized SIP OPTIONS to each peer. The required columns are:

Name (mandatory)
Address (mandatory)
Port (optional, default=5060)
Transport (optional, default=UDP)
Request-URI (optional, only set it if you need a specific one)
To-URI (optional, only set it if you need a specific one)
From-URI (optional, only set it if you need a specific one)

The result of the SIP OPTIONS polling is visible in the Dashboard tab SIP Agents, as it happens with the nodes configured in the tab System > SIP Agents Monitoring (default SIP OPTIONS).

Skip probing

This node allows skipping the probing of SIP agents for this execution of the Service Logic.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.

CDR Post-processing

Dedicated Service Logics can now be defined to post-process the standard type of CDRs that the SRE itself produces. Such type of SL (named CDR post-processing logic) will run after a call is closed, that is on "Stop" type of CDRs, to perform actions like applying a rating by indicating e.g. the final cost of the call, or writing other useful information taken from the original CDR into the SRE internal DB or to an external repository via API, and possibly other useful actions. This is sometimes also referred to as Rating Engine or Light Rating Engine.

The CDR post-processing nodes require the "accounting" license.

This feature comes with a Simulate CDR option in the Service Logic. The user can provide a CDR in input and verify the result of post-processing.

Output CDR Row

When using this node, you have to define exactly the output columns, so that a brand new CDR is produced only containing the columns defined here.

Skip CDR row

This node prevents the production of a new CDR upon execution of this service logic.

Example: the SRE produces 10k standard CDRs , of which 7k inbound and 3k outbound, and you want to post-process only the inbound ones... the "skip cdr row" node can be used to say in the SL: if this cdr is for an outbound call, do nothing (don't produce a post-processed cdr).

Start Node

Description: the starting node of any service logic, automatically placed on the Build grid at service logic creation.

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.

Exit node

Description: Exit the current service logic and give back the execution control to the parent service logic

Fields:

Node name: name for this node, showing in the node label in the service logic Build grid
Description: any additional information, showing below the node name label in the service logic Build grid.

This is set to 2 if stir/shaken verification is not enabled, 0 if stir/shaken check was successful. Otherwise see hereopen in new window for error code values. ↩︎
if ssCode variable is not 0, variable is empty ↩︎ ↩︎ ↩︎

# Nodes Description

# Processing Nodes

# Placeholder mechanism

# Table 1

# Table 2

# Manipulation

# Digits manipulation

# Regular expression substitution

# Set variables

# Unset variables

# Map Value

# Concatenate

# Reverse

# Extraction

# Digits extraction

# Regular expression extraction

# List of records

# Create list of records

# Convert list of records to JSON object

# Convert JSON object to list of records

# Append row to list of records

# Append columns to list of records

# Filter rows from list of records

# Extract row from list of records

# Random pick a row

# Sort list of records

# Shuffle list of records

# Aggregate Column

# Rotate list of records

# JSON

# Create JSON object

# Validate JSON schema

# Extract JSON path

# Flow control

# Audio Codec decision

# Digit analysis

# Combined conditions

# Combined condition groups

# Sequential conditions

# Alarm conditions

# Days conditions

# Load balance

# Regular expression match

# Phone number analysis

# SIP agent status

# Database

# Check access token

# Create database record

# Update database records

# Delete database records

# Database query

# Caching #

# Get cached data

# Set cached data

# Get cached data (MongoDB)

# Set cached data (MongoDB)

# External query

# Improved logging

# HTTP JSON request

# HTTP XML request

# HTTP GET JSON Query (deprecated)

# HTTP GET XML Query (deprecated)

# HTTP PUT XML Query (deprecated)

# LDAP query

# DNS query

# ENUM query

# Nemo QoS

# Read configuration parameter

# Date & time

# Now

# Add/subtract duration

# Extract Date/Time parts

# URI

# Build SIP URI

# Extract SIP URI (deprecated)

# Extract URI elements

# Manipulate URI elements

# SIP

# Extract SIP headers

# Remove Audio Codec

Nodes Description

Processing Nodes

Placeholder mechanism

Table 1

Table 2

Manipulation

Digits manipulation

Regular expression substitution

Set variables

Unset variables

Map Value

Concatenate

Reverse

Extraction

Digits extraction

Regular expression extraction

List of records

Create list of records

Convert list of records to JSON object

Convert JSON object to list of records

Append row to list of records

Append columns to list of records

Filter rows from list of records

Extract row from list of records

Random pick a row

Sort list of records

Shuffle list of records

Aggregate Column

Rotate list of records

JSON

Create JSON object

Validate JSON schema

Extract JSON path

Flow control

Audio Codec decision

Digit analysis

Combined conditions

Combined condition groups

Sequential conditions

Alarm conditions

Days conditions

Load balance

Regular expression match

Phone number analysis

SIP agent status

Database

Check access token

Create database record

Update database records

Delete database records

Database query

Caching #

Get cached data

Set cached data

Get cached data (MongoDB)

Set cached data (MongoDB)

External query

Improved logging

HTTP JSON request

HTTP XML request

HTTP GET JSON Query (deprecated)

HTTP GET XML Query (deprecated)

HTTP PUT XML Query (deprecated)

LDAP query

DNS query

ENUM query

Nemo QoS

Read configuration parameter

Date & time

Now

Add/subtract duration

Extract Date/Time parts

URI

Build SIP URI

Extract SIP URI (deprecated)

Extract URI elements

Manipulate URI elements

SIP

Extract SIP headers

Remove Audio Codec